Arm Plan
we planned that we should cut the carton in the shapes (which are shown) and make a robotic arm by the help of super glow, syringes and syringes tube.
Guide
Firstly we measure the cartons and cut them in right sizes and shapes and make the holes in the right places
secondly we need to attach the cartons with each other by the help of super glue and we make sure that they move. make places for syringes and syringes tube.
then we need to connect everything perfectly to each-other and test it if it is working or not.
The process
Firstly, we print the plan, by the help of plan we measured and cut the cartons in the right sizes and shapes.
We made a hole with skewers on the cartons at its perfect places, and attached the cartons to each other before the glueing them together and made highlights the places that need to glue.
At the next part, we super glued the skewers to cartons at right places and made it sure that the arm is moving.
But at the end, we came across an issue that the syringes were too small for the arm because we used an A3 sized base instead of an A4 to solve the problem we rearranged the syringes so the arm should move.
Besmellah Rafee level 2 robotics 